ENQUIRE NOW

FCW Wires

LoTherme GS-9580 (Mod)

AWS: SFA

EN ISO CODE:

A customized gas-shielded flux-cored wire designed

for the fabrication of a new die and the rebuilding of worn-out

Hot forging dies. The wire has a very good welder's
appeal and easy slag detachability. The deposited
weld metal is tough for hot or cold work tooling. It is
free from cracks, porosities, and any other surface
defects.

Approvals

Applications

LoTherme GS-9580 (Mod) wire is suitable for trimmers, shear, blanking &
forming dies, punches, header dies, forging dies, hot working tools & guides, etc.
The weld metal is suitable for those areas where higher hardness is preferred.

RECOMMENDED SHIELDING GAS :

Argon-CO gas mixture & CO 2

ALL-WELD COMPOSITION (%) WITH Ar-CO2 SHIELDING:

Element	C	Mn	Si	S	P	Cr	Ni	Mo	V	W
Typical	0.40-0.80	0.8-1.8	0.30-0.90	0.030-Max	0.030-Max	5.0-7.5	0.40-0.80	1.6-3.0	0.30-0.60	2.0-3.5

ALL WELD METAL HARDNESS (TYPICAL) :

On a 3-layer deposit after 5600 for 2 hrs, SR condition: 54-58 HRC

Electrical Characteristics: DCEP/DC (+)

Diameter (mm)	Current Range (Amps)	Voltage(V)	Stick Out (mm)
1.6	180 – 280	26 – 30	25 – 30
2.4	200 – 300	26 – 30	30 – 40
2.8	250 – 350	26 – 30	30 – 40

Standard Wire Diameter (mm):

1.6, 2.4, and 2.8

Note: Any other diameter wires may be available on request.

Packaging Data:

The wire is supplied in a layer wound 12.5 kg plastic spool and
2.4/2.8mm wire is also available in 25kg ring packing. Each spool is sealed in a
polythene bag and then packed in a shrink-wrapped corrugated box.

FCW Wires

FCW Wires

LoTherme GS-9580 (Mod)

Choose Any Option To Contact Us